Static Cling Total Blackout Non-Adhesive Window Film Frost Glass Film Bathroom Door Glass Decor Window Sticker Privacy Covering

Price: 9.53 - 14.67

Small Tips for YOU,please read before buying.

*Please Note that This Window Film Only Applies on Smooth Glass Surfaces.Do not Apply to Outside window or Windows with Crack.

*Don't forget to remove transparent backing side before putting on glass or it will not cling(Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).

*Please use a hair dryer to soften the film under cold weather (Heat Resistant up to 176℉)

Decorative Total Black Window Film

100% LIGHT BLOCKING : 100% blackout window privacy film blocks out all sunlight. Create a comfortable sleeping environment when you are resting during the day.

REUSABLE & RECYCLED : With static cling design. Easy to remove and leaves no residue, and can be reused just wet it again.

Privacy Test

Privacy Level : 5 out of 5 star

Installation Instructions:

1. Clean the target surface thoroughly.

2. Measure the surface and cut the film. Leave an extra inch margin each side for an easy adjustment.

3. Prepare enough diluted soapy water in a spray bottle.

4. Spray the surface with the soapy water. Peel off the transparent backing film along a short side.

5. Install the film onto the window.

6. Use the squeegee to remove excess water and any bubbles whist applying the film. Wipe off the water using the towel.

7. Trim off the margins. Here you go!

Some useful tips for you:

• When applying in cold weather: before installation, blow hot air to the film using a hair dryer to soften the film up (Heat Resistant up to 176℉)

• The film works only onflat, clean, and smoothsurfaces.

• Affix a tape on a corner of the back side (the smooth side) to quickly remove the backing film.

• Pleasedo notapply the film todouble pane windows, as the temperature changes might cause the windows to crack.